>Products

Connecting Rods for Racing Applications

Hemi Alcohol Rod Series: HA3000, HA3100, HA3200, HA3300

Hemi Alcohol Rod Series Connecting Rods

Typical applications include but not limited to Top Alcohol, Pro Mod and Tractor Pull engines.

HA3000:

  • Dedicated housing bore diameter of 2.500"
  • Available wrist pin bore diameters of 1.094" and 1.156"
  • Reliable up to 3500 horsepower

HA3100:

Utilizes a deeper pocket than the 3000 Series, therefore lighter

  • Dedicated housing bore diameter of 2.500"
  • Available wrist pin bore diameters of 1.094" and 1.156"
  • Reliable up to 3300 horsepower

HA3200:

Hemi style connecting rod with a housing bore diameter of 2.325"

  • Available wrist pin bore diameters of 1.094" and 1.156"
  • Heavier than the HA3300 Series with a more shallow pocket
  • Reliable up to 3100 horsepower

HA3300:

Hemi style rod with a housing bore diameter of 2.325"

  • Available wrist pin diameters of 1.094" and 1.156"
  • Lighter than the HA3200 Series with a deeper pocket
  • Reliable up to 3200 horsepower

Big Block Rod Series: BBC5000, BBC6000, BBC6100, BBC6200, BBC6500

Big Block Series Connecting Rods

All BBC Series rods available with housing bore diameters of 2.125", 2.225" and 2.325" Available with wrist pin bore diameters of 0.990", 1.031" and 1.094" in the 6500 Series only

BBC5000:

The lightest big block rod with a deep kidney shaped pocket

  • Available beam width of 0.890"
  • Recommended for naturally aspirated
  • applications only
  • Reliable up to 1200 horsepower

BBC6000:

A moderate weight big block rod with a deep, straight pocket

  • Typically used for bracket car applications
  • Available beam width of 0.890"
  • Reliable up to 1400 horsepower

BBC6100:

Heavier than the 6000 Series with a shallow, staright pocket as well as added material around the profile of the wrist pin but not above the pin itself

  • Typically used for moderate forced induction and nitrous applications
  • Available with beam widths of 0.890" and 0.940"
  • Reliable up to 2000 horsepower

BBC6200:

Slightly heavier than the 6100 Series with a modified rod profile transition between the bottom end of the connecting rod to the beam

  • Typically used for moderate to heavy forced induction and nitrous applications
  • Available with beam widths of 0.890" and 0.940"
  • Reliable up to 2800 horsepower

BBC6500:

The largest and heaviest big block rod with added material around and above the profile of the wrist pin bore to accomodate up to a 1.094" wrist pin

  • Reliable up to 2800 horsepower

PRO Rod Series: PRO1930, PRO1950, PRO2000, PRO2100, PRO2480, PRO2500

Pro Rod Series Connecting Rods

PRO1930:

NHRA Pro Stock style rod

  • Utilizes a 3/8" fastener
  • Designed with a housing bore diameter of 2.015" for use with a CB1665 rod bearing
  • Reliable up to 1300 horsepower

PRO1950:

NHRA Pro Stock style rod, heavier than the PRO1930 Series with a beam width of 0.850"

  • Utilizes a 3/8" fastener
  • Designed with a housing bore diameter of 2.015" for use with a CB1665 rod bearing
  • Reliable up to 1400 horsepower

PRO2000:

  • Utilizes a 7/16" fastener
  • Designed specifically with a housing diameter of 2.015"
  • Equipped with a deep, staright pocket
  • Typically used in high horsepower small block applications, also ok for use in light to moderate forced induction applications
  • Reliable up to 1500 horsepower

PRO2100:

  • Utilizes a 7/16" fastener
  • Designed specifically with a housing bore diameter of 2.225"
  • Equipped with a deep, straight pocket
  • Typically used in high horsepower small block applications, also ok for use in light to moderate forced induction applications
  • Reliable up to 1500 horsepower

PRO2480:

  • Utilizes a 7/16" fastener
  • Designed specifically with a housing bore diameter of 2.125"
  • Equipped with a kidney shapped pocket
  • Typically used in high horsepower small block applications, also ok for use in light to moderate forced induction applications
  • Reliable up to 1500 horsepower

PRO2500:

  • The heaviest PRO Series rod
  • Utilizes a 7/16" fastener
  • Available with housing bore diameters of 2.125" and 2.225"
  • Equipped with a shallow, straight pocket
  • Available with beam widths of 0.800", 0.830", 0.850" and 0.890"
  • Typically used in high horsepower and heavy forced induction applications
  • Reliable up to 2500 horsepower

Small Block Rod Series: SB900, SB1100, SB1400, SB1480, SB1500, SB1600, SB1700, SB1780, SB7000

Small Block Series Connecting Rods

All SB Series rods utilize a 3/8" fastener

SB900:

  • Comp Eliminator style rod
  • Designed specifically with a housing bore diameter of 1.890"
  • Available with a beam width of 0.700"
  • Reliable up to 600 horsepower

SB1100:

  • Comp Eliminator style rod
  • Available with housing bore diameters of 2.125", 2.225" and 2.325"
  • Utilizes a beam width of 0.750"
  • Reliable up to 800 horsepower

SB1400:

  • Comp Eliminator style rod
  • Designed specifically with a housing bore diameter of 2.125"
  • Available with a beam with of 0.750"
  • Reliable up to 800 horsepower

SB1480:

  • Designed specifically with a housing bore diameter of 2.125"
  • Heavier than the SB1400 Series with a beam width of 0.800"
  • Typically used in non heads up and bracket car applications
  • Reliable up to 1000 horsepower

SB1500:

  • Comp Eliminator style rod
  • Designed specifically with a housing bore diameter of 2.015" for use with a CB1663 rod bearing
  • Available with a beam width of 0.750"
  • Reliable up to 800 horsepower

SB1600:

  • Comp Eliiminator style rod
  • Designed specifically with a housing bore diameter of 2.015" for use with a CB1665 rod bearing
  • Available with a beam width of 0.750"
  • Reliable up to 800 horsepower

SB1700:

  • Comp Eliminator style rod
  • Simillar to the SB900 Series but heavier with a beam width of 0.750"
  • Designed specifically with a housing bore diameter of 1.890"
  • Reliable up to 800 horsepower

SB1780:

  • Heavier than the SB1500 Series with a beam width of 0.800"
  • Designed specifically with a housing bore diameter of 2.015" for use with a CB1663 rod bearing
  • Typically used in non heads up and bracket car applications
  • Reliable up to 1000 horsepower

SB7000:

  • Designed specifically with a housing bore diameter of 2.225"
  • Utilizes a beam width of 0.800"
  • Typically used in non heads up and bracket car applications
  • Reliable up to 1100 horsepower